Buy
Ordering and Pricing
Download this full information pack about how to place an order, shipping details and product selection. Remember to specify the type of plug format that you require e.g. ploggBlu in NEMA 5-15 or ploggZgb in CEE 7/7 format.
Our standard terms and conditons apply and a copy of these can be downloaded here Terms and Conditions10 All prices are quoted excluding VAT and import duties that may apply.
Plogg-zgb and Plogg-blu sample quantities are available to OEMs now.
For all OEM enquiries please contact us using our Contact Form
or telephone +44 (0) 1472 266731
Product pricing
|
ploggBlu |
Embedded and robust 2.4GHz ISM band transceiver based on CSR's BlueCore BC04 chipset, giving access to the features if the Bluetooth Version 2.0 specification. See Order form for volume prices |
£97.00 |
|
ploggZgb |
Embedded low power 2.4GHz ISM band transceiver based on the Ember EM250 single chip ZigBee/ IEEE802.15.4 solution and ZNet 2.5. The device will act as a ZigBee Router or Coordinator. The Telegesis ETRX2 uses firmware version 21x. See Order Form for volume prices |
£97.00 |
|
ploggZgb EAP |
The Ethernet Access Point is a gateway which allows access to Plogg-zgb mesh networking modules over an industry standard Ethernet IP Network. In addition, once the IP address of the EAP has been established and Firewalls permitting, the EAP can be accessed from anywhere in the world. |
£120.00 |
|
ploggZgb EAP-PA |
As above only with a power amplified radio module for greater range. |
£140.00 |
|
ploggZgb USB dongle |
Based on the Ember EM250 SoC and ZNet 2.5, the Telegesis ETRX2USB is a high performance, low power 2.4GHz ISM band transceiver in a USB Stick form factor. The ETRX2 comes with firmware version 21x |
£30.00 |
|
ploggZgb USB dongle-PA |
As above only with a power amplified radio module for greater range. |
£35.00 |
i |
Ext CT 100A |
The split core 100A external transducer can be factory fitted to any format of Plogg device to provide circuit or whole house measurement. Comes with approximately 1 metre cable. The CT is attached to the live only supply on the load and the Plogg must be connected to the mains supply to provide a voltage reference. |
£27.00 |
i |
Plogg-Zgb-ExtCT |
Plogg with exteranl split core 100A current transducer with ZigBee RF solution. CT comes with approximately 1 metre of cable. See Order Form for volume prices |
£124.00 |
|
SDK |
Software Development Kit: The Plogg DLL library is intended to be used to interface to applications written in C++, Visual Basic and C#, this has been tested using Visual Studio 2005 SP1. The library can be used in the format of the pre-built DLL, alternatively the full source code is supplied for customers who wish to modify, use or integrate the Plogg into their own application code. The library has been tested using Visual Studio 2005 SP1. |
£250.00 |
What happens when I place my order?
When confirmation of your order is sent, this is to indicate that we have received your order. It does not indicate that a contract exists between us. We will indicate acceptance of your order, and hence a contract between us, when we send you an invoice.
We have included this term to protect us in the case that a mistake has been made in pricing, we have inadvertently under-priced goods, or we are no longer able to supply a particular product for some reason. In the case of a change of price, we will always contact you first to ensure that the price is acceptable.
If your item is not in stock, we will back order for you. You will always be emailed with the option to cancel your order if you would rather not wait.